Cement-Bonded Particle Board

Fiber Cement Board

Interior and Exterior Paints

Thermal Insulating Plaster

Betopan Deck



Areas of Usage
Color and Design
Packaging / Storage / Handling


Tepepan ® for permanent and aesthetically detailed solutions and long-lasting, healthy, safe and environmentally friendly structures. For a livable environment and safe structures.

Fire Class A  Fast and Easy Application

Advantages of Use

  • Environment friendly.
  • Does not contain any harmful substances to health.
  • Asbestos free.
  • A1 Fire Class.
  • Does not release toxic gas during the fire.
  • Resistant to moisture and water.
  • Resistant to the effects of sunlight.
  • Resistant to seasonal changes.
  • Easy assembly and modification procedures.
  • It is odorless and does not release toxic gas.
  • Extends and protects the life of insulation material when
  • used in heat and sound insulation systems.
  • Resistant to impacts.
  • Resistant to biological and chemical wastes.
  • Easy to carry, light weight.
  • Insect-proof, non-putrescible, no molding.
  • Easy to cut.
  • Offers different solutions in all areas of building projects.
  • A finishing material
  • Can be painted repeatedly.
  • Cement based.
  • Can be used with insulating material of any desired thickness.
  • Can be used in fine details with smooth cutting surfaces.
  • Very high impact resistance compared to gypsum based boards.
  • Protects the supporting carrier system.
  • Creates facades and surfaces compatible with fire regulations.

Area of Application

  • Construction of interior and exterior walls of all kinds of buildings
  • In ventilated facade systems
  • In insulated - plaster cladding systems
  • All surfaces in prefabricated and light steel structures
  • Structural sections made of steel construction
  • As the finishing material by just painting
  • All kinds of coating, wall paper or backerboard of ceramics in exterior walls and indoor spaces
  • Backerboard applications in wet spaces
  • Indoor and outdoor ceiling applications
  • Suspended ceiling systems
  • Fire wall construction
  • In areas where sound insulation is required
  • In thermal insulation systems
  • As bottom sheet under roof covering materials
  • As backing material of cabinets or panels
  • On walls, parapets and ceilings of balconies and terraces
  • Soffit and fascia cladding
  • Steel column and fake column cladding
  • Construction of site fences
  • On shaft walls

Standard Dimensions  

Thickness 4,6,8,10,12,14 mm
Dimensions  1250 x 2500 mm
 1250 x 2800 mm
 1250 x 3000 mm

Technical Specifications  

Density 1150 ± 75 kg/m3
Fire resistance  A1 building material according to EN 13501-1
Bending Strength  ≥  7 /average 10-11) N/mm2
Elastic module in bending ≥ 4000 N/mm 2
Durability Classifications  Category A, Class 2

Exterior Color Chart

Tepe Betopan Multiple Drilling Machine

Tepe Betopan Application with Clips

Tepe Betopan TPR Fixing Detail Application

Areas of Usage

Walls Facades Ceilings

  • Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
  • The panels are on wood pallets covered in plastic with rings and corner brackets added.
  • During transport the panels must be covered in canvas.
  • When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
  • The panels must be stored in a closed area.
  • Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
  • If the panel packages are to be stacked caution should be taken to align them.
  • If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
  • After panels are taken from the package to be used the package should be covered over again with the plastic.
  • The storage area must be closed.
  • When stacking pallets the pallet feet should be lined up one on top of the other.
  • Do not take the plastic cover off until use.
  • Do not take off the steel strips until use.
  • The materials should be placed on the smoothest ground possible.
  • When storing, pallets should be carefully placed on top of each other with 5 pallets at most  and the total height of pallets should not exceed 3,5 meters.
  • When loading, only two pallets at a time should be loaded.
  • When loading make sure that the pallets are placed on the truck in a balanced way.
  • Pallets ready for transport

Sample Projects

 You can find sample projects of Tepe Betopan products in this section. 


Document Center

You can find product brochures, product catalogs and technical documents of Tepe Betopan products by clicking here.



You can reach the news about Tepe Betopan and other group companies by clicking here.


You can reach our contact information in this section.
Tepe Betopan

Tepe Betopan Yapı Malzemeleri
San. ve Tic. A.Ş.

All Right Reserved: © 2020
Follow Us
Merkez / Betopan Fabrika

Beytepe Köyü Yolu No:5 06800
Bilkent - Ankara / Türkiye

T : +90 312 266 45 51 (pbx)
F : +90 312 266 01 50
E : betopan@betopan.com.tr
E : export@betopan.com.tr

Tepepan Fabrika

Alcı Mahallesi, ASO 2. ve 3. Organize
Sanayi Bölgesi 2026. Cadde No:12
Sincan - Ankara / Türkiye